FABCO Colours Library, No. 01

Guide, Repair

How to fix bleach stains on clothes with fabric paint

A bleach mark is missing colour, not a stain. How to neutralise the bleach, put colour back with fabric spray paint and heat set the repair.

FABCO Colours studio. Published . 7 minute read.

The steps one at a time, in large type. The screen stays on while you work.

A bleach mark is not a stain. Nothing has been added to the fabric. Colour has been taken out of it. That is why washing and scrubbing leave the mark unchanged, and why the repair is to put colour back.

Fabric Spray does that in light, even coats. This guide takes the repair in order: neutralise the bleach, choose how much to recolour, spray, then heat set the result so it is machine washable.

First, stop the bleach

Bleach left in the fibres keeps working. Neutralise it before any colour goes on, so the new colour sits on stable cloth. There is more detail in how to neutralise bleach.

Follow these steps one at a time, in large type, with the screen kept on.
  1. RinseRinse the area under cold running water for a few minutes. Most of the bleach leaves here.
  2. NeutraliseSoak the mark for about ten minutes in a bleach neutraliser. Dyers use a product sold as Bleach Stop or Anti-Chlor. Household 3% hydrogen peroxide, diluted about one part to ten parts water, also works.
  3. Rinse againRinse again in cold water, then wash the garment as normal.
  4. DryLet it dry completely before any paint is applied.

Choose how much to recolour

Recolouring the whole panel or the whole garment gives the most even result. A deliberate design over the area is the third option. Choose the approach that suits the garment.

  • Recolour the whole panel. A sleeve, a front, a leg. Spray from seam to seam. The eye reads an even panel as intentional.
  • Recolour the whole garment. Every part gets the same coats, so the colour is even throughout. It works well on blue denim. See restoring faded denim.
  • Make a feature of it. Spray or stencil a deliberate shape over the mark. This suits a small spot in the middle of a large area.

To bring the new colour closer to the original, layer two colours in light coats. The method is in colour-matching an existing garment.

Fabric spray colours misted into each other on white cloth
Light coats blend into each other. That is what makes a whole panel look even.

Spray it

  1. ProtectPut card inside the garment to keep the paint off the back layer. Mask anything you want to keep clean.
  2. ShakeShake the bottle well before use.
  3. TestSpray a small hidden area first, such as an inside hem. Let it dry before you judge the colour, because it looks darker wet.
  4. SpraySpray onto the clean, dry fabric from about 15 to 20 cm away, in light, even passes.
  5. Build it upApply several light coats until you reach the colour you want. Let each coat settle before the next.
  6. DryLeave the garment to dry for 24 hours.
Light passes from the pump bottle. Each coat is thin.

Heat set it to make it permanent

Once the paint has dried for 24 hours, iron the area on the cotton setting, on the reverse side, for about 5 minutes. Keep the iron moving. If the care label calls for a cooler iron, use the hottest setting it allows and iron for longer. The full method is in how to heat set fabric paint.

Then wait 48 hours before the first wash. After that the garment is machine washable. Wash it inside out where you can.

Questions

Can you fix a bleach stain with fabric paint?

Yes. A bleach mark is an area with the colour removed, so you repair it by putting colour back. Neutralise the bleach first, then recolour the panel or the whole garment with fabric spray paint and heat set it.

Does fabric spray paint survive the washing machine?

Yes. FABCO Fabric Spray is machine washable once it is heat set. Let the paint dry for 24 hours, iron on the cotton setting on the reverse side for about 5 minutes, then wait 48 hours before the first wash. Wash the garment inside out where you can.

How do you match the colour of the garment?

Choose the nearest of the six Fabric Spray colours and test it on a small hidden area. Mist a second colour over the first in light coats to adjust the shade. For the most even result, recolour the whole panel from seam to seam.

FABCO Colours Library, No. 01. Published 14 September 2026.

The guides are free. The paint this one uses is below.

Every kit is dispatched from the United Kingdom with free tracked UK delivery. Orders to the United States are sent with duties paid. Available from our official eBay and Etsy shops.

100% positive feedback from 521 eBay ratings