FABCO Colours Library, No. 17

Guide, From the workshop

How to heat set fabric paint so the colour is permanent

Heat setting makes fabric paint permanent. How to do it with an iron on the cotton setting, how long to wait before washing, and how to wash it afterwards.

FABCO Colours studio. Published . 6 minute read.

The steps one at a time, in large type. The screen stays on while you work.

Heat setting is the step that makes fabric paint permanent. It takes about five minutes with an ordinary iron. After a short wait, the fabric is ready for the wash.

This guide gives the method for Fabric Spray step by step. It then sets out the timings for Silk Paint and the Metallic Dusts, which each have their own instructions.

Dry is not the same as set

Fabric paint is colour held in a binder. When the paint dries, the water has gone, but the binder has not finished its work. Heat is what fixes it to the fibre.

Set paint and unset paint look the same. Go by whether the fabric has had the iron, not by how it looks or feels.

Heat setting Fabric Spray

These timings are for Fabric Spray. They are the same for all six colours, from Yellow to Violet.

Follow these steps one at a time, in large type, with the screen kept on.
  1. Let it dryLeave the painted fabric to dry for a full 24 hours, so the iron meets dry paint.
  2. Set up the ironTurn it to the cotton setting and switch the steam off. Dry heat does the work.
  3. Turn the fabric overIron on the reverse side. Turn a garment inside out. Put a spare cloth under it to protect the board.
  4. IronIron for about 5 minutes, and keep the iron moving. Cover every painted area, right to the edges.
  5. Let it coolLeave the fabric flat until it is cool.
  6. WaitWait 48 hours before the first wash.
Spray-painted green and orange T-shirts drying on a washing line
Sprayed T-shirts drying. Give yours a full 24 hours before the iron comes out.

On a large piece such as a hoodie, work in sections. Give each painted section its own 5 minutes.

Fabrics that need a cooler iron

The cotton setting is right for cotton, linen, canvas and denim. Where a care label calls for a cooler iron, adjust the method.

  • Read the care label. Use the hottest setting it allows, and no hotter.
  • Iron for longer. Lower heat needs more time to do the same job.
  • Use a pressing cloth. A piece of plain cotton between the iron and the fabric protects the surface.
  • Test first. Paint and heat set a hidden area or an offcut, then wash it, before starting the whole piece.

Washing afterwards

Once the spray has been heat set and has had its 48 hours, it is machine washable. Wash it inside out where you can. Do not bleach it, and do not tumble dry it on high heat.

A checklist for a lasting result

  • Wait the full 24 hours. The paint is touch dry sooner. Give it the whole day before ironing.
  • Switch the steam off. Dry heat sets the paint.
  • Iron right to the edges. Edges and corners need the same time as the middle.
  • Wait 48 hours before washing. The wait after ironing is part of the process.
  • Use an iron. The instructions are written for an iron, which puts steady heat exactly where the paint is.

If a piece was washed before it was heat set, let it dry, add a light coat where the colour has thinned, wait 24 hours and heat set it.

Questions

How do you heat set fabric paint with an iron?

Let the paint dry for 24 hours. Set the iron to cotton with the steam off, turn the fabric to the reverse side and iron for about 5 minutes, keeping the iron moving over every painted area. For FABCO Fabric Spray, wait 48 hours before the first wash.

How long should fabric paint dry before washing?

Let FABCO Fabric Spray dry for 24 hours, heat set it with an iron, then wait another 48 hours before the first wash. After that it is machine washable, inside out where you can.

What iron setting do you use to heat set fabric paint?

Use the cotton setting, with the steam off, for FABCO Fabric Spray. Iron the reverse side for about 5 minutes and keep the iron moving. Silk Paint also takes the cotton setting. The Metallic Dusts take the silk setting for 2 to 3 minutes.

FABCO Colours Library, No. 17. Published 5 October 2026.

The guides are free. The paint this one uses is below.

Every kit is dispatched from the United Kingdom with free tracked UK delivery. Orders to the United States are sent with duties paid. Available from our official eBay and Etsy shops.

100% positive feedback from 521 eBay ratings