Gold, silver and copper swatches on black cloth, all three still bright
Gold, silver and copper Metallic Dusts on black cloth.

FABCO Colours Library, No. 14

Guide, From the workshop

How to paint metallic gold on black fabric and denim

Gold, silver and copper that cover on black fabric and denim. How to mix Metallic Dusts with Textile Medium No. 2, paint, and heat set the result.

FABCO Colours studio. Published . 6 minute read.

The steps one at a time, in large type. The screen stays on while you work.

Metallic gold on black cloth depends on coverage. A dense metallic layer hides the dark fabric beneath it and keeps its shine.

The Metallic Dusts cover on black and dark fabric. This guide shows how to mix them, how to get a fine line or a solid block, and how to make the result permanent on black cotton and denim.

What is in the set

The 3 Colour Metallic Dusts set is Gold Dust 420, Silver Dust 421 and Copper Dust 422, 18ml each, plus a 30ml bottle of Textile Medium No. 2 with a fine-tip applicator.

The dust is the colour. Textile Medium No. 2 is the iron-fix binder that makes it permanent. Mixed together and heat set, the shimmer is locked into the cloth and stays soft and flexible.

Gold Dust 420 is a warm gold. Silver Dust 421 is a bright silver with a fine, even sparkle. Copper Dust 422 is a rosy copper. Each one keeps its metallic look on black and dark fabric.

Prepare the fabric

Follow these steps one at a time, in large type, with the screen kept on.
  1. Start cleanWork on clean, dry fabric. Wash and dry a new garment first.
  2. ProtectPut card inside a jacket or behind a pocket, so the paint stays on the layer you are working on.
  3. Mark the designMark the design lightly in tailor's chalk, which shows clearly on black cloth.
  4. TestMix a little and try it on a spare piece of the same fabric, or somewhere hidden such as an inside hem. The test shows the exact colour and coverage before work begins.

Mix the dust and the medium

Shake the Textile Medium No. 2 well. Tip a little dust into a small dish and add medium. Mix by eye and by feel, and use the test piece to confirm the consistency.

  • More medium gives a mix that flows. Use it for fine lines, lettering and detail.
  • Less medium gives a thicker mix. Use it for solid coverage, which is the aim on black.

Mix small amounts as you need them.

Paint the design

Solid areas are brushed on and fine lines are drawn. Both can be used on the same piece, in one metal or in all three.

  1. Block in solid areasUse a soft brush and the thicker mix. Lay the first coat evenly with light strokes.
  2. Add a second coatLet the first coat dry, then look at it. A second coat builds the coverage where a denser metal is wanted.
  3. Draw the fine linesFor line work, use the thinner mix with the applicator nozzle or a fine brush. Spirals, script and outlines are all drawn this way.
  4. Work it into denimDenim has a ridged surface. Brush across the ridges as well as along them, so the gold reaches the valleys of the weave too.
  5. DryLeave it to dry for 24 hours.
Gold, silver and copper metallic swatches painted on black cloth
Gold, silver and copper on black cloth. All three still read as metal.

Heat set and wash

After 24 hours, iron the painted area on the silk setting for 2 to 3 minutes. Keep the iron moving. This setting is specific to the Metallic Dusts. The settings for the other ranges are in silk paint or fabric spray.

After fixing, hand wash gently in cool water with a mild detergent. Do not bleach and do not tumble dry.

Gold on silk, wood and stone

The same mix works on silk. For a dark ground on a white scarf, paint it first with Black silk paint, let it dry and heat set it. Then draw over it in gold. Copper sits well over Blue in the same way.

Run the full sequence on a spare piece of silk first. Paint it, fix it and wash it, then start the scarf.

The mix also works on wood and stone, for wooden boxes, signs and painted pebbles. On these surfaces no heat setting is needed. Let it dry.

Questions

How do you get metallic gold paint to show up on black fabric?

Use a dense mix. With the Metallic Dusts, use less Textile Medium No. 2 for a thicker mix with solid coverage. Apply one coat with a soft brush, let it dry, and add a second coat for the densest finish.

Is metallic fabric paint permanent on denim?

Yes. Mixed with Textile Medium No. 2 and heat set, the Metallic Dusts are permanent on fabric. Leave the paint to dry for 24 hours, iron on the silk setting for 2 to 3 minutes, then hand wash gently in cool water with a mild detergent. Do not bleach or tumble dry.

Can you paint fine gold lines on black fabric?

Yes. Mix the gold dust with more Textile Medium No. 2 so that it flows, then draw with the applicator nozzle or a fine brush. Mark the design lightly in tailor's chalk first, which shows clearly on black cloth.

FABCO Colours Library, No. 14. Published 16 November 2026.

The guides are free. The paint this one uses is below.

Every kit is dispatched from the United Kingdom with free tracked UK delivery. Orders to the United States are sent with duties paid. Available from our official eBay and Etsy shops.

100% positive feedback from 521 eBay ratings